Current location > Product Center > Text

Oblique interpolation power turret turning milling compound Center

Model: JL-52MYS

Hits: 65

Type: Special purpose machine tool

Jl-52mys inclined insert power tool tower with two opposite spindles, oblique Y axis control servo power tool tower with double-sided tool block. Therefore, two different parts (or the same parts) can be turned milling.

Unique double channel control system can realize double machine tool spindle, four axis linkage, able to complete for some complex shape precision components of turning, drilling, milling or grinding compound processing, two sets of spindle and tool rest can switch at the same time, shorten the production cycle component, also can avoid the form tolerance because of the repeated clamping error is too large.

The whole machine tool adopts the layout form of double spindles, the spindle has the C axis control function of indexing and interpolation, and the two spindles have the function of rotation synchronization (speed synchronization). It can realize the docking of parts without stopping, and realize the turning-milling compound processing of one clamping process. Machine tool X, Y superposition type inclined bed structure, friction, high rigidity of the structure, and heavy cutting ability and high precision characteristics, the bed structure long-term stability without deformation.



Jl-52mys inclined interpolation power tool tower turn-milling compound center technical parameters:





1. High rigidity integral casting bed

? The machine adopts L-shaped integral casting bed, which has high rigidity and good chip removal performance.

? The machine tool bed is equipped with lubricating oil and coolant recovery groove, to avoid its leakage to the surrounding environment pollution.

? The whole shaft of the straight shaft adopts roller guide rail, high rigidity and low moving friction, with the characteristics of durability and longevity.

2, high precision built-in spindle

? Built-in motorized spindle structure, smooth operation ability due to no vibration caused by similar gear, belt and other vibration sources. And start, stop time is short, suitable for mass production.


3. Y-axis bed saddle (MY, MSY configuration)

? A sliding saddle with an Angle of 30° is used to form a Y-axis stroke of ±50mm(100mm) through the combined movement of Yt axis and X axis.

? All linear motion axes adopt roller guide rail, the response characteristics of the machine tool, the high rigidity of the machine tool.

? X-axis lead screw adopts pre-drawn structure design to provide guarantee for high-precision machining.

4, 12 Angle high resolution power knife tower

? Adopt the form of servo motor indexing, tooth disc positioning, hydraulic clamping, fast transposition speed, high positioning accuracy.

? Power tool spindle adopts two gear reduction to expand the torque of milling spindle.

? The bolt fixed cutter head structure, the cutter block rigidity is good.

5, NC programmable control tail seat (MS configuration)

? The NC driven tailstock can adjust the position of tailstock in the automatic cycle process, suitable for automatic machining field.

? Tailstock thrust can also be adjusted while tailstock is pressing the workpiece. And through the program to achieve thrust adjustment, can correspond to a variety of processing procedures.

6, two spindle (MS, MSY configuration)

? Accessory spindle and spindle have synchronous function (option), can realize the workpiece transfer between two spindle chucks under the rotating state, reduce the auxiliary clamping time, and realize one clamping, complete the front and back of the workpiece two sequence processing.




We use cookies to personalize content and ads, provide social media features and analyze traffic to our website. By using this site you agree to the placement of cookies on your computer in accordance with the terms of our data protection policy.

Agree to use cookiesCancel